A blender is a handy kitchen appliance that can help you make smoothies, soups, sauces, and more. However, like any other appliance, it can get damaged over time. One of the most common problems that blenders face is cracking. Cracks can occur on the blender jar, the lid, or the base. Cracks can cause leaks, spills, and even injuries if not fixed properly.
Fortunately, fixing a cracked blender is not as hard as it may seem. You don't need to buy a new blender or take it to a professional repair shop. You can fix it yourself at home with some simple tools and materials. In this article, we will show you how to fix cracked blender in a few easy steps.
Step 1: Identify the Location and Size of the Crack
The first step is to identify where and how big the crack is on your blender. This will help you determine what kind of material and method you need to use to fix it. Here are some tips to help you locate and measure the crack:
Unplug the blender and remove the jar from the base.
Inspect the jar, the lid, and the base carefully for any signs of cracks. You may need to use a flashlight or a magnifying glass to see them better.
If you find a crack, mark it with a permanent marker or a piece of tape.
Use a ruler or a tape measure to measure the length and width of the crack. Write down the measurements for future reference.
Step 2: Choose the Right Material and Method to Fix the Crack
The next step is to choose the right material and method to fix the crack on your blender. Depending on the location and size of the crack, you may need to use different materials and methods. Here are some common options:
If the crack is on the jar or the lid, and it is small (less than 1 inch long and 1/8 inch wide), you can use food-grade silicone sealant to fill and seal it. Silicone sealant is a flexible and waterproof material that can bond well with plastic and glass. You can find it at most hardware stores or online.
If the crack is on the jar or the lid, and it is large (more than 1 inch long or 1/8 inch wide), you may need to use epoxy resin to fill and seal it. Epoxy resin is a strong and durable material that can bond well with plastic and glass. However, it is not food-grade, so you need to cover it with another layer of food-grade silicone sealant after it cures. You can find epoxy resin at most hardware stores or online.
If the crack is on the base, and it is small (less than 1 inch long and 1/8 inch wide), you can use super glue to fill and seal it. Super glue is a fast-acting and strong adhesive that can bond well with plastic and metal. However, it is not waterproof, so you need to cover it with another layer of silicone sealant after it dries. You can find super glue at most hardware stores or online.
If the crack is on the base, and it is large (more than 1 inch long or 1/8 inch wide), you may need to use plastic welding to fill and seal it. Plastic welding is a process of melting and fusing plastic pieces together using heat. You will need a plastic welding kit that includes a heat gun, plastic rods, and a metal mesh. You can find plastic welding kits at some hardware stores or online.
Step 3: Prepare the Surface and Apply the Material
The final step is to prepare the surface and apply the material that you have chosen to fix the crack on your blender. Here are some general guidelines:
Clean the surface of the crack with a damp cloth or paper towel. Remove any dirt, dust, grease, or debris that may interfere with the bonding of the material.
Dry the surface of the crack with a dry cloth or paper towel. Make sure there is no moisture left on the surface.
Follow the instructions on the package of the material that you have chosen. Apply a thin layer of the material 06063cd7f5